Get a complete hold on 70-680 exam syllabus through Lead2pass training and boost up your skills. No need to hassle if you are stuck in exam difficulties, Lead2pass will assist you right through exam specific preparation material. Lead2pass delivers the most comprehensive preparation material, covering each and every aspect of 70-680 exam curriculum.

QUESTION 221
You support desktop computers that have Windows 7 Enterprise installed. All computers are configured with system protection on drive C and with a backup task that runs daily at midnight.
One of the users reports that in the morning she has installed a new version of a browser.

After the installation, a folder that has favorite shortcuts was replaced with new content.
You need to restore the most recent version of the folder that contains the user data.
What should you do?
(To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

Answer:

QUESTION 222
You use a computer that has Windows 7 SP1 installed and has a folder named C:\Data. The active network connection for the computer is configured as Public.
You assign User1 to a local group called DataUsers. The group has been granted Read NTFS permissions for the folder. User1 browses to the shared folder across the network and receives the following error message:
"Access is Denied."
You need to ensure that the user can download files from the shared folder.
What should you do?

A.    Allow file and printer sharing through Windows Firewall.
B.    Change the network location of the computer from a Public network to a Home or Work network.
C.    From the Security settings of the C:\Data folder, assign the Full Control NTFS permissions to User1.
D.    From the Advanced Sharing settings of the folder, assign the Read share permission to User1.
E.    From the Advanced Sharing permissions, enable caching.

Answer: D

QUESTION 223
You have a public computer that runs Windows 7. On the computer, you create two user accounts named Admin1 and User1. Admin1 is a member of the Administrators group and User1 is a member of the Users group. You need to configure the computer to meet the following requirements:
– Allow Admin1 full access to Control Panel.
– Prevent User1 from accessing Control Panel.
What should you do?

A.    Create a new local Group Policy object (GPO) linked to the Admin1 account. From User Configuration set Prohibit Access to Control Panel to Disabled.
B.    Create a new local Group Policy object (GPO) linked to the User1 account. From User Configuration, set Prohibit Access to Control Panel to Enabled.
C.    From Local Security Policy, set System objects: Strengthen default permissions of internal system objects (e.g., Symbolic Links) to Enabled and set User Account Control: Admin Approval Mode for the Built-in Administrator account to Disabled.
D.    From Local Security Policy, set System objects: Strengthen default permissions of internal system objects (e.g., Symbolic Links) to Disabled and set User Account Control: Admin Approval Mode for the Builtin Administrator account to Enabled.

Answer: B

QUESTION 224
Your network has a main office and a branch office. The branch office has five client computers that run Windows 7 and a server that runs Windows Server 2008 R2. The branch office server is enabled for BranchCache.
You need to configure Windows Firewall on each client computer so that cached content can be retrieved from the branch office server.
Which firewall rule should you enable on the client computers?

A.    BranchCache – Content Retrieval (Uses HTTP)
B.    BranchCache – Hosted Cache Server (Uses HTTPS)
C.    BranchCache – Peer Discovery (Uses WSD)
D.    File and Printer Sharing

Answer: A

QUESTION 225
You have an answer file for a Windows 7 installation.
You need to perform an unattended installation of Windows 7 by using the answer file.
What should you do?

A.    Name the answer file autounattend.ini and save it to a USB disk. Start the computer from the Windows 7 DVD.
B.    Name the answer file unattend.txt and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (Windows PE).
C.    Name the answer file autounattend.xml and save it to a USB disk. Start the computer from the Windows 7 DVD.
D.    Name the answer file unattend.xml and save it to a USB disk. Start the computer from the Windows Preinstallation Environment (Windows PE).

Answer: C

QUESTION 226
You have a Windows 7 Windows image (WIM) that is mounted.
You need to view the list of third-party drivers installed in the image.
What should you do?

A.    Run Dism.exe and specify /get drivers parameter.
B.    Run Driverquery.exe and specify the /si parameter.
C.    From Device Manager, view all hidden devices.
D.    From Windows Explorer, open the \Windows\System32\Drivers folder from the mount folder.

Answer: A

QUESTION 227
Note: This QUESTION is part of a series of QUESTIONs that use the same set of answer choices. AnAnswer choice may be correct for more than one QUESTION in the series.
You use a desktop computer that has Windows 7 Ultimate SP1. This relevant portions of the computer configuration are shown in the following below.
– The Disk Management Console (Click the Exhibit button.)

– The System Properties window (Click the Exhibit button.)

– The System protection for Local Disk C window (Click the Exhibit button.)

You create a password for several Microsoft Office files from your Documents library.
You share the Documents library over a network.
You need to ensure that network users are unable to access the unprotected version of the files. What should you do?

A.    Delete restore points.
B.    Create a restore point.
C.    Perform a system restore.
D.    Search for the file in the Recycle Bin.
E.    Increase disk space used for system protection.
F.    Copy the file from a previous version of a folder
G.    Set restore settings Only restore previous version of files.
H.    Run the cipher /x command from the elevated command prompt.
I.    Run the vssadmin list volumes command from the elevated command prompt.
J.    Run the vssadmin list shadows command form the elevated command prompt.
K.    Run the compact /U <file_name> command form the elevated command prompt.

Answer: A

QUESTION 228
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.
You use a desktop computer that has Windows 7 Ultimate SP1. This relevant portions of the computer configuration are shown in the following below.
– The Disk Management Console (Click the Exhibit button.)

– The System Properties window (Click the Exhibit button.)

– The System protection for Local Disk C window (Click the Exhibit button.)

You share your Documents library over a network.
You discover that one of the files in the library was replaced with a previous version and then renamed.
You need to restore the most recent version of the original file.
What should you do?

A.    Delete restore points.
B.    Create a restore point.
C.    Perform a system restore.
D.    Search for the file in the Recycle Bin.
E.    Increase disk space used for system protection.
F.    Copy the file from a previous version of a folder.
G.    Set restore settings Only restore previous version of files.
H.    Run the cipher /x command from the elevated command prompt.
I.    Run the vssadmin list volumes command from the elevated command prompt.
J.    Run the vssadmin list shadows command form the elevated command prompt.
K.    Run the compact /U <file_name> command form the elevated command prompt.

Answer: F

QUESTION 229
Note: This question is part of a series of questions that use the same set of answer choices. An Answer choice may be correct for more than one question in the series.
You use a desktop computer that has Windows 7 Ultimate SP1. This relevant portions of the computer configuration are shown in the following below.
– The Disk Management Console (Click the Exhibit button.)

– The System Properties window (Click the Exhibit button.)

– The System protection for Local Disk C window (Click the Exhibit button.)

You share the Pictures library over a network.
You discover that a JPEG image file located in the library was moved by a network user into a ZIP archive and is protected by using a password.
You need to open the image file.
What should you do?

A.    Delete restore points.
B.    Create a restore point.
C.    Perform a system restore.
D.    Search for the file in the Recycle Bin.
E.    Increase disk space used for system protection.
F.    Copy the file from a previous version of a folder.
G.    Set restore settings Only restore previous version of files.
H.    Run the cipher /x command from the elevated command prompt.
I.    Run the vssadmin list volumes command from the elevated command prompt.
J.    Run the vssadmin list shadows command form the elevated command prompt.
K.    Run the compact /U <file_name> command form the elevated command prompt.

Answer: F

QUESTION 230
You have a computer that runs Windows 7.
You have a system image backup of the computer.
You install a new application that is configured to run as a service.
You restart the computer and receive a STOP error message.
You need to successfully start Windows 7 in the minimum amount of time.
What should you do?

A.    Start the computer from the Windows 7 installation media and select Startup Repair.
B.    Start the computer and select Last Known Good Configuration from the advanced startup options.
C.    Start the computer and select Safe Mode from the advanced startup options. Restore a restore point.
D.    Start the computer and select Safe Mode from the advanced startup options.Restore the system image.

Answer: B

70-680 exam is worth challenging task but you should not feel hesitant against the confronting difficulties. Get a complete hold on 70-680 exam syllabus through Lead2pass training and boost up your skills. No need to hassle if you are stuck in exam difficulties, Lead2pass will assist you right through exam specific preparation material. Lead2pass delivers the most comprehensive preparation material, covering each and every aspect of 70-680 exam curriculum.

www.lead2pass.com/70-680.html